Ryco SynTec wins gold, but what makes it different?
Ryco’s Australian-developed SynTec Performance Oil Filters have picked up major innovation honours, including Gold at the 2026 AFR BOSS Most Innovative Companies awards. Awards are nice, but at Master Tech we’re more interested in what has actually changed inside the filter, and whether it can make a meaningful difference to an engine.

Ryco’s SynTec Performance Oil Filters won Gold in the Manufacturing & Consumer Goods category at the 2026 AFR BOSS Most Innovative Companies awards.
Ryco recently had a pretty good day at the 2026 Australian Financial Review BOSS Most Innovative Companies awards.
Its SynTec Performance Oil Filters took Gold in the Manufacturing & Consumer Goods category, while Ryco was also named Most Innovative Company in the Small Company category.
Congratulations all round.
But oil filters aren’t normally the sort of component that gets innovation judges overly excited, so we thought it was worth looking beyond the award and finding out what Ryco has actually done differently.
Because there is considerably more engineering inside a modern oil filter than its simple metal canister might suggest.
Key Points
- Ryco SynTec won Gold at the 2026 AFR BOSS Most Innovative Companies awards.
- Ryco says SynTec can reduce flow resistance by up to 33 per cent compared with the equivalent OE filter tested.
- Contaminant capacity increased by up to 20 per cent in comparative testing.
- SynTec removes a minimum of 99 per cent of contaminants at 20 microns.
- The technology was developed partly through Ryco’s work with Supercars GEN3 engines.
- Improved filtration does not mean extended service intervals; manufacturer servicing requirements still apply.
- Correct filter selection remains critical because bypass valves, dimensions and flow characteristics vary between engines.

Ryco SynTec Performance Oil Filters are designed to improve filtration efficiency while maintaining the oil flow an engine requires.
The balancing act inside an oil filter
At its most basic, an oil filter has one job: remove contamination from the engine oil.
Unfortunately, achieving that isn’t quite as simple as fitting progressively finer filter media.
Make the media too restrictive and you may capture smaller particles, but you also make it harder for the lubrication system to push the required volume of oil through the filter.
So filter designers are constantly balancing three main factors: filtration efficiency, oil flow and contaminant capacity.
Filtration efficiency determines how effectively particles are removed. Flow determines how easily oil can travel through the filter. Capacity determines how much contamination the filter can hold before restriction begins increasing.
Improving one without negatively affecting the others is where the engineering becomes interesting.
And that’s what Ryco says it has achieved with SynTec.
Less restriction and greater capacity
According to Ryco, comparative laboratory testing conducted to the ISO 4548-12 oil-filter test standard showed SynTec produced up to 33 per cent lower flow resistance and up to 20 per cent greater contaminant capacity than the equivalent OE filter used for comparison.
Ryco also specifies that the SynTec range removes a minimum of 99 per cent of contaminants at 20 microns.
Twenty microns is just 0.02 millimetres.
That might sound insignificant, but inside an engine, particles around this size can contribute to abrasive wear in components operating with extremely small clearances and very thin lubricating oil films.
Bearings, crankshafts, piston rings, cylinder walls and other precision-machined components rely on that oil film to prevent metal-to-metal contact.
Allow hard microscopic particles to continually circulate through those areas and they effectively become an abrasive suspended in the engine oil.
So there is a legitimate advantage in removing finer contamination, provided it can be achieved without adversely restricting the oil supply.
That’s the important part.
Why oil flow matters
An engine doesn’t just need clean oil. It needs enough oil, delivered quickly enough to the areas that require lubrication.
This becomes particularly important during a cold start when the oil is considerably thicker.
It also matters in engines working under high loads, elevated temperatures or sustained RPM where the lubrication system is moving substantial volumes of oil.
A highly efficient filter isn’t particularly useful if achieving that efficiency creates excessive restriction.
SynTec uses a high-efficiency synthetic filter media designed to create a complex path through which the oil passes, trapping fine contamination while maintaining oil flow.
Some SynTec designs also use reinforced media and components designed to cope with elevated oil pressures and temperatures.

Some of the development behind SynTec came through Ryco’s involvement with Supercars GEN3 engines, where maintaining oil flow under demanding conditions is critical.
Developed with some help from Supercars
There is also an interesting performance connection behind SynTec.
Part of Ryco’s development work came through its involvement with the Repco Supercars Championship and the GEN3 race engines.
Obviously, the operating environment of a Supercar engine is considerably different to the average road vehicle.
But the fundamentals remain the same.
The engine needs sufficient oil flow, contaminants need to be removed and the filter has to continue doing its job under pressure, temperature and load.
Lessons learned in that environment have helped Ryco develop filtration technology that has now migrated into road-going applications.
And from a workshop perspective, that’s probably more interesting than the trophy.
More capacity doesn’t mean longer service intervals
One point worth making is that improved filtration or greater contaminant capacity shouldn’t be interpreted as permission to extend engine oil service intervals.
The engine manufacturer’s servicing requirements still apply.
If a vehicle is operating under severe conditions and the manufacturer specifies shorter servicing intervals, those recommendations should also be followed.
Better filtration should be viewed as additional protection within a properly maintained lubrication system, not as a substitute for regular maintenance.
The oil itself still deteriorates through heat, combustion by-products, fuel dilution, moisture and other factors that an oil filter cannot correct.

Towing places sustained load on an engine, making oil flow, temperature control and effective filtration particularly important.
Correct filter selection still matters
SynTec is now available for a growing range of Australian vehicles.
Ryco currently lists the Z929ST SynTec filter for 2020–2027 Isuzu D-Max models.
Other applications include the R2720PST for versions of the Ford Ranger PX and PX3, Ford Everest UA and Mazda BT-50 UP0Y, along with applications covering selected Ford Transit, Transit Custom and Toyota HiAce models.
But that doesn’t mean you should simply grab a SynTec filter because it looks similar to the filter already fitted.
Modern engines can have very specific requirements covering filter dimensions, bypass-valve settings, anti-drainback valves, oil pressure and flow characteristics.
Different engines within the same vehicle range can also use completely different filters.
The correct filter should always be confirmed against Ryco’s application catalogue, registration lookup or the relevant manufacturer’s information.
So, is it just another premium oil filter?
Not really.
What makes SynTec interesting isn’t simply that Ryco has developed a finer filter medium.
The engineering challenge is achieving improved filtration while still maintaining the oil flow an engine requires.
If the laboratory results translate into real-world operation, the combination of lower flow resistance, high filtration efficiency and increased contaminant capacity is a worthwhile development.
Oil filters might not be the most glamorous component sitting on the parts shelf.
But considering what an engine costs when lubrication and contamination control go wrong, perhaps they deserve a little more attention than they usually receive.
Related Reading:
- Cabin Air Filters: What They Do and When to Replace Them
- How to change the Cabin Fresh Air Filter on a Kenworth K200
- Catch Can – What are the Benefits?


